Clear polycarbonate seals and edge wipes ensure that water stays in the shower.

The Clear Bottom Wipe With Drip Rail snaps onto bottom of the door.

3/8" soft wipes on bottom create a water resistant seal.

45 degree drip rail sheds water back into the shower stall

Fits Glass Size: 1/4", 3/8", 5/16", 1/2"

Sold By the Length or in 10 Packs:
95" good for 3 sweeps or 10 packs 36" long for 3/8" or 1/2" only

Catalog Number: P914WS;P956WS;P990WS;P912WS

Clear Bottom Wipe with Drip Rail snaps onto bottom of door. The single wipe on bottom creates a water resistant seal. 45 degree "Soft" Drip Rail sheds water back into the shower basin. Convenient in 36" (914 mm) long pieces to prevent waste and save on shipping costs. Minimum order one box (10 pieces)

Catalog Number: P938WS36

Clear polycarbonate seals and edge wipes ensure that water stays in the shower without detracting from the clean style of the frameless shower. Seals are designed to go vertically between panels or underneath the door as a seal.

The versatile Multi-Purpose "H" Wipe has two rigid legs and two soft legs. One or both soft legs can be trimmed to accommodate many installation options.

Fits Glass Size: 3/8" (10mm)

Sold by length: 95"

Catalog Number: P375HW

Clear polycarbonate seals and edge wipes ensure that water stays in the shower without detracting from the clean style of the frameless shower.

Seals are designed to go vertically between panels or underneath the door as a seal.

The versatile Multi-Purpose "H" Wipe has two rigid legs and two soft legs. One or both soft legs can be trimmed to accommodate many installation options.

Fits Glass Size: 1/4" (6mm); 5/16" (8mm); 3/8" (10mm) or 1/2" (12mm)

Sold by length: 95"

Catalog Number: H Seals

Single-Piece Bottom Sweep

Snaps Onto Door Bottom to Achieve a Seal

Fits 10mm (3/8") glass P501BR or 12mm (1/2") glass P661BR

Use Monolithic Tempered Glass

95" (2.41 m) Stock Length

Suggested Gap: 7/16" (11 mm)

This ultra clear CRL One-Piece Bottom Rail is snapped on the bottom of the door to achieve a seal. Because it is a single-piece sweep, it means the vinyl seal that hangs down from the sweep will firmly direct the water back into the shower enclosure.

Catalog Number: P501BR;P661BR

Clear Dual Durometer PVC Seal and Wipe has two uses:

Snap it on door bottom and the soft lip acts as a wipe or

Snap it on an overlapping bi-fold door and the soft lip acts as a seal.

Versatile Seal Can Be Used as Bottom Sweep, or Vertically on Bi-Fold Doors

Snap on Application

Glass: 1/4"; 5/16"; 3/8"; 1/2"

98" Stock Lengths

Catalog Number: P14WS - P770WS-P880WS-P120WS

Clear Vinyl Bulb Seals are now available with pre-applied Hi-Bond Tape for ease of installation.

Simply peel back the thin tape lining to expose the clear tape

98" (2.49 m) Stock Length

For 1/4" - 3/8" glass thickness

Fills gap between 5/32" - 3/8"

SDTJT2 Small 5/32" space filler ideal for 5/16" - 3/8" glass

SDTBT2 Medium 7/32" space filler ideal for 1/4" - 3/8" glass

SDLB Large 3/8" space filler on 3/8" - 1/2" thick glass (Note this size only does not come with pre-applied tape. Can be siliconed on or tape purchased separately)

Includes 5 lengths per pack minimum

Catalog Number: SDTJT2; SDTBT2;SDLB

95" Stock Length
Can Be Used on Inswing and Outswing Doors
Suggested Gap: 1/4" (6 mm)
Use Monolithic Tempered Glass

This CRL Clear Polycarbonate 'U' with Bulb Attachment is a versatile seal that can be mounted to the edge of a door or panel for a variety of installation configurations. The soft bulb portion of the Seal allows doors to swing both in and out of the enclosure if desired.

Catalog Number: PCR8; PCR10; PCR12

This Clear, Black or White 'H' Jamb is for use on 180 degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. Leaves a clear appearance while serving as a functional seal. Entire 'H' Jamb is made of hard polycarbonate.

Catalog Number: P140HJ; P516HJ; P380HJ; P120HJ

"Y" Inline Panel Seal is for use on 180 degree inline glass-to-glass applications

Available in Clear, White and Black

Soft Vinyl Single Leg for Quieter Door Closure

U' portion PVC is rigid with single leg made of soft vinyl.

Snaps Onto Fixed Panel

For Glass to Glass Applications
95" Stock Length

Fits Glass: 5/16"; 3/8"; 1/2"

Catalog Number: PCC8; PCC10; PCC12

Sweep to fit standard Manhattan shower doors

32.5" Grey Rubber Splash Guard
Flexible seal

Double fin at bottom

3 foot length

Catalog Number: 10068501-005-001

Clear vinyl bottom seal
5/32" (4mm) Tee style
36" long
1" wide

For aluminum framed shower doors

Catalog Number: M6211

Shower Door Thresholds are mounted directly below the shower door to let the water drain back into the shower stall.

Ideal for flat or out sloping curbs.

The low contour will not harm feet and leaves a minimal sightline from the outside of shower

Size: 3/8" high, 5/8" wide

Color: Chrome, Brushed Nickel, Brite Gold, White

Sold by length: 95"

Catalog Number: S1L001

Shower Door Thresholds are mounted directly below the shower door to let the water drain back into the shower stall.

Ideal for flat or out sloping curbs.

The rounded low contour will not harm feet.

Size: 1/4" high, 13/16" radius

Color: Chrome, Brushed Nickel, Oil Rubbed Bronze, Brite Gold, White

Sold by length: 8 feet

Catalog Number: SDT980

For 3/8" (10 mm) Glass
Door Mounted Aluminum Channel with SDTW Clear Vinyl Wipe
Creates Even Sight Line When Next to Fixed Panel Glazed with Deep U-Channel
Available in Up to Four Finishes
Use Monolithic Tempered Glass

This door bottom mounted CRL U-Channel with Door Wipe has a 3/8" (10 mm) profile, which makes an even sight line when used next to a fixed panel glazed with Deep U-Channel on the bottom. While many will choose to use a clear wipe at the bottom of the shower door for an 'all-glass' look, others will want the continuous appearance of metal while using this Shower Door U-Channel with Wipe. Available in 98" (2.49 m) stock lengths.

Catalog Number: SDW38

Translucent Double Fin Seal can be used for inswing or outswing doors.

The two different size fins allow the installer a choice of seal lengths. Use as is, or simply trim the fins as necessary.

Adhere 5/16" (8 mm) rigid base to glass edge or wall using pre-applied clear Very Hi-Bond Tape.

98" lengths

5/16" wide for 5/16" - 1/2" glass

Minimum 5 lengths per pack included for shipping

Catalog Number: SDTDFT2

Translucent Silicone Bulb Seal can be used on inswing or outswing doors to close gaps from 1/16" to 3/16" (1.6 to 5 mm)

Can be Used on Inswing and Outswing Doors

98" (2.49 m) Stock Length

Adheres with clear double sided Tape

Minimum pack of 5 lengths included

Catalog Number: S1LBT2

Multiple Uses for Versatility
Commonly Used in 135 Degree Neo-Angle Applications

This Clear Polycarbonate Strike Angle Jamb is used for both hinge and strike jambs.

It can be adhered to the wall of a fixed panel using our CRL Clear Very Hi-Bond Tape.

It is commonly used as a jamb for neo-angle installations when a clean look is most desired.

Size: 1/2" * 1/2"

Sold by length: 8 feet

Catalog Number: P12LJ

This Clear 180 degree Polycarbonate Strike and Door H-Jamb with Vinyl Insert is snapped onto the fixed panel running inline with the door.

Sturdiness of this seal makes it one of our better jambs at reducing water leakage for inline installations.

For Glass-to-Glass Applications
Vinyl Insert for Added Coverage
Suggested Gap: 3/16" (4.7 mm)

Catalog Number: P1801P

Polycarbonate 'U' with 90 Degree Vinyl Finseals multiple uses include applying to the sliding door or fixed panel of a Hydroslide Sliding Door System.

Also use as a 90 degree seal for a fixed panel meeting a door at 90

98" Stock Lengths

Glass size: 5/16" & 3/8"

Catalog Number: PC0890 or PC1090

SDTWT2-Wipe is now available with pre-applied Hi-Bond Tape, for ease of installation.

Simply peel back the thin tape lining to expose the pre-applied clear tape.

Popular 98" (2.49 m) stock lengths

Used on in or out swinging doors

Closes gaps up to 7/16"

Works for 7/16" - 1/2" glass

Minimum packs of 5 seals included for shipping

Catalog Number: SDTWT2

Glass Thickness & Type:

• 3/8" - Clear
• 3/8" - Obscured
• 1/2" - Clear
• 1/2" - Obscured

SDTL L-Seal is now available with pre-applied high-bond tape, for ease of installation.

Simply peel back the thin tape lining to expose the clear tape.

Popular 98" (2.49 m) stock lengths

L Seals offered for 5/16" and 3/8" glass

Min. pack size 5 lengths included

Catalog Number: SDTNLT2

Translucent 'V' Seal are used only on doors swinging one way to seal gaps from 3/16" to 1/4" (5 top 6 mm).

Adhere 5/16" (8 mm) rigid leg to the glass edge or wall using our Clear Very Hi-Bond Tape.

Door closes into soft vinyl leg.

98" lengths

Minimum 5 per pack included

Catalog Number: SDTST2

For 8 or 10 mm Glass

This clear Polycarbonate is snapped onto the strike side fixed panel at a 90 degree angle from the door.

Catalog Number: PCJ8; PCJ10

Magnetic Profile provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4"- 1/2" (6mm to 12 mm) Glass.

APPLICATION:
180 Degree Glass-to-Glass: Use PMA10 and PMB10 (Door swings in one direction)
180 Degree Glass-to-Glass: Use PMC10 and PMC10 (Door swings in both directions)
135 Degree Glass-to-Glass: Use PMA10 and PMC10 (Door swings out only)
90 Degree Glass-to-Glass: Use PMA10 and PMB10 (Reverse for polarity-door swings out only)

Catalog Number: PMC10;PMC8

This Magnetic Profile provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4" to 1/2" (6mm to 12 mm) Glass.

APPLICATION:
180 Degree Glass-to-Glass: Use PMA10 and PMB10 (Door swings in one direction)
180 Degree Glass-to-Glass: Use PMC10 and PMC10 (Door swings in both directions)
135 Degree Glass-to-Glass: Use PMA10 and PMC10 (Door swings out only)
90 Degree Glass-to-Glass: Use PMA10 and PMB10 (Reverse for polarity-door swings out only)

Catalog Number: PMA10;PMA8

45 Degree RH Magnetic Profile for Glass-to-Glass fits 1/4" to 1/2" glass.

This CRL Magnetic Profile provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4" to 1/2" (6mm to 12 mm) Glass.

APPLICATION:
180 Degree Glass-to-Glass: Use PMA10 and PMB10 (Door swings in one direction)
180 Degree Glass-to-Glass: Use PMC10 and PMC10 (Door swings in both directions)
135 Degree Glass-to-Glass: Use PMA10 and PMC10 (Door swings out only)
90 Degree Glass-to-Glass: Use PMA10 and PMB10 (Reverse for polarity-door swings out only)

Catalog Number: PMB10;PMB8

Replacement plastic bottom splashguard for shower door, 31 inches long for Maax Kleara Pivot or Imagine shower doors

Catalog Number: 10048170-092